10 DRAINAGE CHANNELS Asola scavata sulla parete del canale per accogliere il tassello After cleaning the parts using the special detergent, smear some “First Coll” glue over the connecting block and at channel slot Insert the nut supplied in the BGP kit in its seat in the connecting block The BGP kit includes the screw and nut Position the connecting block in the slot within 2 minutes and make sure that it is aligned with the grid hole 2 Tighten until fully locked 4 3 1 COLLE PVC COLLE PVC The channel has been developed on a modular basis to better suit projects requiring precision lengths. Thanks to its special design, the printed channel offers increased strength and structural compactness. The pre-cut slots available on the channel surface every 10 cmmake cutting the modules into shorter lengths noticeably easier. Thanks to this simple technical solution, can be made ready for projects of any length. When you cut in-between the reinforcement ribs, you maintain coupling continuity and then can assemble whole modules and shortened modules into lengths multiple of 10 cm. Installation will be easy and fast and with a minimum amount of waste. comes in various depths to enable full customization from the design phase. The deep type features considerable load bearing capacity, while the shallow type is particularly suitable where depth constraints are present, such as in terrace floors. Both are ideal for applications in public, industrial and residential buildings and for water drainage in sports facilities, swimming pools, garage entrances, basement premises, road verges, squares, parking lots, silos, roof-gardens, terraces, etc. CUTTING LINE ACCESSORIES FOR FIXING THE GRIDS AND FOR CONNECTIONS TO THE EVACUATION NETWORK ARE AVAILABLE Deep Shallow THE ACCESSORIES The system accessories use the same bayonet coupling system as the channels (see figure on the left), therefore they are easily installed. During assembly, glue the various items using the special welding glue for PVC “First Coll” to obtain perfect sealing against ingress of water. Accessories are fitted with pre-cut outlets that allow flow-through after breaking the diaphragm. On some channels it is possible to fix the grids using a special accessory, the BGP. HOW TO FIX THE GRIDS BGP130
RkJQdWJsaXNoZXIy MTIzMjc4Nw==