GULLY TRAPS - TECHNICAL NOTES First Plast gully traps are the ideal drain for sanitary installations (bathrooms, showers) and wherever water collection is needed by limiting the depth of pipes (terraces). Due to their structure ,they help the permanence of an enough amount of water to prevent the spread of bad odors. For an easy and effective cleaning, the central grille is removable. By inserting a PVC bend at 87°30' into the outlet, it is possible to direct the outlet horizontally. Each gully trap size allows for the connection of different diameters depending on the requirements. Gully traps are available, depending on technical specifications or installation requirements, in different materials (PVC, ABS, Polypropylene) designed specifically for outdoor or indoor application. The improvement of the product and the search for new technical solutions have always been pursued by our Quality Laboratory, which, through regular production control, verifies that gully traps always meet the features set by international standards (drainage capacity is verified according to UNI EN 1253). PLEASE NOTE: ABS gully traps consist of 2 elements: the frame is hooked on the body so that you can rotate the horizontal outlet (where available) as you need. To be 100% waterproof, we do suggest to seal the two parts as follows (please see the attached pictures): - Unhook the 2 parts; - Once you have orienteered the horizontal outlet (if available), put sealing glue on the edge; - Hook the frame on the body. Pictures: Many models of First Plast gully traps have a very interesting feature. The bend socket required to connect the gully trap to the water evacuation system is recessed inside it. This technical detail allows installation even where there is a low base, with little slope of pipes. Put the glue on the body's edge Hook the frame on the body Unhook the frame from the body Lorem ipsum 29
RkJQdWJsaXNoZXIy MTIzMjc4Nw==