ASSEMBLY WITH GLUE 16 First Plast's gutter system is extremely easy to install: the elements can be glued or assembled with gaskets (allowing optimal expansion in all weather conditions). The accessories with the brand in this catalogue can be assembled in both of the above mentioned ways. • Cut gutter profiles in the length desired using an ordinary iron hacksaw and remove burrs using sandpaper. • Clean the surfaces to be glued using the special PVC detergent. • Apply glue to both gutter end and gutter stopend seat using a brush or by squeezing it out from the tube. • Join within 2 minutes and hold the joined pieces firmly together for a few seconds to allow the glue to cure. • Carry out the sealing test not earlier than 24 hours from gluing ASSEMBLY WITH GLUE
RkJQdWJsaXNoZXIy MTIzMjc4Nw==